New Products List ｜SMC CORPORATION

Lever Hand Valve　VHL Series

New

Updated Nov-24

Space saving, Easy to operate (Vertical type) 5-port lever valve
Weight reduction of up to 45%
? Comparison between VHL21□D-02□ and VH210-□02
Footprint reduced by 58%
VHL210D 3216.5 mm² ? VH20□ 7750 mm²
Panel mounting internal height reduced by 18.6 mm
For panel mounting
? Comparison between VHL210D and the existing VH20□ model
Flow rate increased by 73%
? Comparison between VH211□-02□ and VH210-□02
(Flow rate characteristics 1 → 4/2 (P → A/B))
3 operation types

Suction Cup/With Non-slip Feature　ZP3M Series

Updated Nov-24

An oval flat shape with non-slip feature has been added. [New]
Compatible with workpieces with an elongated adsorption surface
Longer life (More than twice that of urethane cups)
Cup material: FS61 (Fluoro-based rubber) with excellent abrasion resistance
Reduced number of cup replacements
Non-slip special ribs
Diagonal ribs are radially arranged to secure the gripping force in all directions.
?Prevents workpiece slippage
?Secure adsorbing and transferring are possible.
Bowl shape with excellent flexibility
Curved workpieces can also be adsorbed.
The cup follows the workpiece shape, making stable adsorption possible.
Horizontal holding force: 387 N (Cup diameter ?100)
Suitable for high-temperature workpieces (200°C)
Suitable for workpieces with oil film
As oil is ejected to the grooves between special ribs, the lateral slipping of workpiece can be suppressed even on a steel plate with oil film.

[Compatible with Manifold Controller] Electric Actuators Slider Type/Rod Type/Guide Rod Type　LE2F□□H/LE2Y(G)□H

New

Updated Nov-24

Slider Type Belt Drive LE2FB□H Series has been added. [New]
Guide Rod Type LE2YG□H Series has been added. [New]
Compatible with manifold controller
Up to 16 axes can be connected
Annual CO₂ emissions reduced by up to 38% through motor control optimization (SMC comparison)
8.7 kg-CO₂e/year (14.1)
? The numerical values vary depending on the operating conditions.
Battery-less absolute encoder type
Restart from the last stop position is possible.

IO-Link Compatible 2 in 1 Auto Switch　D-MH2□ Series

New

Updated Nov-24

Outputs process data according to the actuator stroke position
A single switch can discriminate between max. 3 position points.
Discriminable resolution: ±0.1 mm　? Within the high-resolution range
Detection position setting can be done away from the actuator.
Process data output (–1000 to 1000)
Can also be used with the 2 in 1 auto switch single unit if there is an IO-Link master

Low Profile Air Gripper　MHF2 Series

New

Updated Nov-21

?25 and ?32 have been added. [New]
High rigidity, Gripping point distance: Max. 170 mm (For ?32, at 0.4 MPa)
Height: Max. 66% reducti
Moment reduction when transferring workpieces
72.8 mm → 25 mm(Comparison with our MHZ2 Series equivalent gripping force products)
3 types of strokes available for each size
Short stroke, Medium stroke, Long stroke

Vacuum Manifold for Fieldbus System　ZKJ Series

New

Updated Nov-24

Vacuum pads and actuator driving can be
controlled with a single manifold [New]
Positive pressure unit
5-port solenoid valve [New]
Vacuum unit
Energy saving ejector Air consumption: 92% reduction
Fieldbus compatible
Space saving: Requires no separate input/output units
Reduced wiring time
Compatible protocols: PROFINET, IO-Link, EtherNet/IP, EtherCAT
Exhaust sealing function
Quick workpiece release
4 stations/8 stations/12 stations/16 stations manifold compatible

Ionizer / Bar Type　IZS51 Series

New

Updated Nov-24

High speed static neutralization: Fastest time 0.1 s
Space saving: Height 70 mm x Width 28 mm
Compact and flat body
Can be mounted in narrow spaces
Supports the IO-Link communication protocol
Low maintenance cartridge
Concentrating the air (for reducing emitter contamination)
around the emitter and the assisting air (for ion transfer)
Reduces dirt on the emitter, compared with the existing model
Valve unit option
For reduction in air consumption by stopping air purge during stand-by mode

Refrigerated Air Dryer/For Use in Europe, Asia and Oceania　IDFA□ Series

New

Updated Oct-24

Standard IDFA□E/□ Series
?IDFA3E～15E1
　　[For use in Europe] Low GWP refrigerant: R1234yf (HFO) [New]
　　? Not available for air transport
　　[For use in Asia and Oceania] Refrigerant: R134a (HFC)
?IDFA60 to 90
　　[For use in Europe, Asia and Oceania] Refrigerant: R410A (HFC)
Large Size IDFA□F Series
?[For use in Europe, Asia and Oceania] Refrigerant: R407C (HFC)
?Tolerant of high temperature environment !
　　Top of its class in the industry for the large air-cooled type
　　Ambient temperature 45°C at max.,
　　Inlet air temperature 60°C at max.
?Energy saving design
　　Exhaust heat reduced by 25% at max.
　　Ambient temperature increase suppressed
　　Employs a heat exchanger made of high corrosion-resistant
　　stainless steel

e-Actuator Easy to Operate Integrated Controller　Slider Type/Rod Type/Guide Rod Type　EQFS□H/EQY□H/EQYG□H Series

New

Updated Oct-24

Guide Rod Type　EQYG□H Series [New]
Size: 16, 25, 32
Easy to set up, just like air equipment!
Two position stop with no programming required
Three position stop with no programming required
Cycle time can be set in all control modes.
Downsized with Integrated Controller, Wiring saving, Labor saving
· Programless · Reduced adjustment time
Annual CO₂emissions reduced by up to 59% through motor control optimization [5.8 kg-CO₂e/year (14.1)]
? The numerical values vary depending on the operating conditions.

Clamp-on Type Flow Sensor IP65　PFUW Series

New

Updated Oct-24

Benefit from the eight “zeros” with clamp mounting!
Zero piping work
Zero leakage
Zero clogging
Zero pressure loss
Zero fluid contact
Zero fluid contact parts material concerns
Zero foreign matter entry into piping
Rated flow rate range from zero L/min
“Easy mounting and retrofitting” Reduced installation work

Air Cylinder ?20, ?25, ?32, ?40　CM2 Series

New

Updated Oct-24

A double rod type, a single acting type, a non-rotating rod type, and a direct mount type have been added. [New]
Made-to-order options have been added. [New]
Special port location (-XC3), Made of stainless steel (-XC6), Dust resistant cylinder (-XC4), Heat- resistant cylinder (-XB6), etc.
Cylinder with rod end bracket is standardized.
Interchangeable in mounting with the existing model
Various mounting bracket options
Mounting brackets suitable for various installation conditions
Improved mounting flexibility
Part numbers for products with a rod end bracket and/or a pivot bracket available

4-Position Dual 3-Port Valve: Body Ported/Base Mounted　SY5000/7000-X701

New

Updated Oct-24

Features two 3-port valves built into one body
The dimensions are the same as those of the double solenoid.
The 3-port valves on the A and B sides can be operated independently.
When used as a 3-port valve, only half the number of stations are required.
Mixed mounting on the standard SY5000/7000 series 5-port solenoid valve manifold base is possible.

Non F-Gas (CO₂ Refrigerant) Refrigerated Thermo-chiller　HRZC Series

New

Updated Sep-24

Non F-Gas
Uses a CO₂ refrigerant
Greatly reduced GWP
GWP = 1 Compliant with each country’s refrigerant regulations
As of the end of September 2024
EU refrigerant regulations: GWP150 or more
US refrigerant regulations: GWP700 or more
California, US refrigerant regulations: GWP750 or more
? “GWP” indicates the global warming potential. The values are based on the IPCC AR4.
Air transport possible
Eliminates the need to pay for F-Gas recovery & disposal
Eliminates the need for periodic inspections based on the Fluorocarbon Emissions Control Act (Japan)

Low GWP Refrigerant Chiller Thermo-chiller Standard Type　HRSF150/200 Series

New

Updated Sep-24

Low GWP Refrigerant Chiller
GWP: 146^?　?Regulation (EU) 2024/573, AIM Act 40 CFR Part 84
EU refrigerant regulations: GWP150 or more
US refrigerant regulations: GWP700 or more
California, US refrigerant regulations: GWP750 or more
Environmentally friendly R454C as refrigerant (Not available for air transport)
No heater is required, as the circulating fluid is heated using only the heat exhausted by the refrigerating circuit.
Compatible with power supplies in Europe, Asia, Oceania, and North, Central, and South America
3-phase 400 VAC
Low-noise design 70 dB(A)
Outdoor installation IPX4

[Model with Residual Pressure Release Function] Compact Indicator Type Speed Controller with Pilot Check Valve　ASP-S Series

New

Updated Sep-24

Flow rate control is possible via the compact indicator.
Model with residual pressure release function: Cylinder pressure can be manually released.
Model without residual pressure release function: Temporary intermediate stops are possible.
Horizontal and vertical types are available, which can be selected depending on the installation conditions.
Easily mounted using a hexagon wrench

3-Screen Display Condensation Checker (Digital Temperature & Humidity Switch)　PSH Series

New

Updated Sep-24

A relative humidity under pressure (inside piping) display function has been added. [New]
A condensation checker can prevent such problems!
Allows for the visualization of humidity inside piping
Detects abnormalities prior to condensation generation
Can be easily connected to any pipe you want to monitor
Compact size allows for easy installation
Visualization of relative humidity
Real-time monitoring
Remote/Condition monitoring
Remote confirmation via switch output preventing condensation problems!

ISO 13849-1 Compliant Safe Exhaust Valve Modular Connection Type　VPX400 Series

New

Updated Sep-24

Safety standard ISO 13849-1 compliant
(Corresponding to categories 3 and 4)
Exhaust flow rate characteristics [L/min (ANR)]　? At 0.6 MPa
10,500 (VPX406-A3)
13,000 (VPX406-A3)
15,000 (VPX406-A6)
Space saving & lightweight: 3 functions have been integrated.
Dual residual pressure release valve + Soft start-up valve + Main valve inconsistency detection
Modular connection is possible.
(AC30/40/50/60-D series)

Suction Cup/Compatible with Metal Detectors　HF3A-ZP3F Series

New

Updated Sep-24

Bellows type cup with excellent cushioning and flexibility
Reduces the deformation of soft workpieces such as bread
The cups and retainers are made of materials compliant with the FDA (U.S. Food and Drug Administration)
dissolution test, EC directives, and Japan Food Sanitation Act standards.
Improved durability due to anti-stick grooves
Equipment for the food manufacturing industry HF3A- series

Pilot Operated 2-Port Solenoid Valve　JSXH-X1

New

Updated Sep-24

Max. operating pressure differential: 4.0 MPa
Application examples: Blow molding, Laser processing machines, Nitrogen filling unit
Fluid: Compressed air, Nitrogen, Argon, Oxygen^?
? When using oxygen, please refer to "Fluid Supply."
Improved environmental resistance
Dustproof/waterproof IP67 structure (IP65 for the DIN terminal)
With a stainless steel coil cover
Low particle generation
Oil-free
Easy maintenance
The coil can be replaced by simply removing the clip.
Power saving (Power consumption: 6 W)

Compact Guide Cylinder ?12, ?16, ?20, ?25, ?32, ?40, ?50　MGPK Series

Updated Aug-24

A type with an air cushion has been added for
bore sizes ?12 to ?50. [New]
Volume: Max. 28% reduction（538cm³ → 390cm³）
Weight: Max. 41% reduction (0.32 kg → 0.19 kg)
High rigidity: Optimized configuration allows for compact body with high rigidity
Plate thickness increased by up to 33%, Higher rigidity
Lube-retainer is added to the guide rod.

Standard Air Cylinder (Square Cover)　MB2/MDB2 Series

Updated Aug-24

3 times better durability due to the air cushion + rubber bumper structure
Allowable kinetic energy: Max. 1.5 times
Has the same kinetic energy as the existing MB series product which is 1 size larger
CO₂ emissions (Air consumption) can be reduced by up to 39%.
CO₂ emissions (Air consumption) can be reduced due to downsizing. (Air consumption for one cycle)
The overall length, mounting dimensions, and mounting brackets are interchangeable with the existing MB series product.

Compact 5-Port Solenoid Valve A top-ported type　JSY3000 Series

Updated Jul-24

A top-ported type has been added to the JSY3000 series.
4(A) and 2(B) port output pressure detection is possible.
(Caution) The mounting bases are side ported.

Longer Life Cylinder　C55-XB24

Updated Jul-24

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specifications and dimensions as the existing model,
C55 ISO Cylinder series.
ISO Standards (21287)

Energy Saving, Exhaust-Recovery Booster Regulator　VBAE Series

Updated Jul-24

CO₂ emissions (Air consumption) :Max. 40% reduction
(Based on SMC's measuring conditions)
Driven by reusing the exhaust air
Increase factory air pressure by 1.7 times Air-only operation that requires no power supply, and allows for easy installation.
Operation noise: 65 dB (A)
15 dB (A) reduction compared with the existing model (VBA series) (Based on SMC's measuring conditions)
Charging time: Max. 50% shorter
Reduced maintenance frequency due to improved life
(Based on SMC's measuring conditions)
Compatible with vertical and horizontal installation
Mounting interchangeability with the existing model (VBA series)

2-Color Display
Digital Flow Switch　PF2M7(-L) Series

Updated Jul-24

3-Screen Display Digital Flow Monitor (Dedicated for the PF2M7) [New]
Allows for the monitoring of remote lines PFGM302 Series
Dry air, N₂, Ar, CO2
A wide range of flow measurement is possible with 1 product.
Flow ratio 100:1, Smallest settable increment: 0.01 L/min
Improved resistance to moisture and foreign matter
Compact, Lightweight
Weight: 27.3% lighter (55g ? 40g)
Low current consumption: 35 mA or less
Grease-free
IO-Link compatible

Biomass Tubing　TU/TS/T-X309

Updated Jul-24

Tubing according to carbon neutrality
CO₂ reduction amount: Max. 18.7 kg
? Comparison with the TS series (Tubing O.D. 12 mm; Tubing I.D. 9 mm), Soft nylon tubing, 100 meters roll
Reduction in CO₂ and greenhouse gases by reducing the use of petroleum driven raw materials, resulting in a greater contribution towards decarbonization.

High Purity Air Operated Chemical Liquid Valve　JLV20/30/40/50 Series

Updated Jun-24

Body class 4 has been added.[New]
Suppresses the generation of particles and reduced footprint!
The special structure allows for reduced impact when the valve is closed
as well as particle generation suppression.
Reduced footprint (Compared to the existing model):
Valve width reduced by 20%, Mounting pitch reduced by 45%
Applicable for applications requiring high pressure/high back pressure
Operating pressure: 0 to 0.5 MPa, Back pressure: 0 to 0.5 MPa
　(Improved by 66% compared to the existing model)

Vacuum Gripper System (Foam Type)　ZGS Series

Updated Jun-24

Compatible with the collaborative robots of 4 companies
UNIVERSAL ROBOTS OMRON/TECHMAN ROBOT,FANUC, YASKAWA Electric [New]
Suitable for the palletizing and depalletizing of corrugated cardboard, etc.
Combines all functions required for adsorption
Ejector unit
(Ejector, Supply valve/Release valve, Silencer, Pressure switch)
Can be used immediately by simply connecting 1 electrical cable and air piping
Weight: 3.9kg^＊ Reduces the load on robots
＊ For ZGSNPK-400240BS4-RM1C8
CO₂ emissions (Air consumption) (SMC comparison)
Ejector with new design
227 L/min (ANR) ← 270 L/min (ANR)
Compared to ZL6H (Supply pressure: 0.6 MPa)

Electric Stopper Cylinder　LEB□ Series

Updated Jun-24

Designed in response to customers' requests for a motorized conveyor line
With 2 control types available depending on the application
Controller
Controllerless
Ensured stopper cylinder mounting interchangeability with equivalent stopper performance
Easy replacement of shock absorbers Replaceable just by loosening the set screw

ISO Standards (21287) Compact Cylinder　C55/CD55 Series

Updated Jun-24

ISO Standards (21287)
1.8 times the anti-lateral load capacity [New]
The allowable lateral load has been improved by changing the material of the bushing. (For ?20)
Increased the standard product's maximum stroke limit (to 300 mm) [New]
Standardization of the Double rod (C55W) type, Simple specials, and Made-to-order options [New]
Change of rod end shape (-XA□)
Heat-resistant cylinder (–10°C to 150°C) (-XB6)
Low-speed cylinder (5 to 50 mm/s) (-XB13)

Electric Actuator/Rod Type Dust-tight/Water-jet-proof (IP69K Equivalent) 　HF2A-LEY Series

Updated Jun-24

Enclosure: IP69K equivalent
Smooth design for less residual liquid accumulation
External parts: Stainless steel 304
Scraper, Static seal: US FDA compliant material (Blue), EC1935/2004 compliant material
Grease: NSF-H1 grade
Equipment for the Food Manufacturing Industry　HF2A- Series
Lubricants or rust proof agents are not used for the external parts.
Otherwise, lubricants or rust proof agents for the food machinery are being used.
US FDA compliant materials are used.
Work load: Max. 80 kg^? 　? Size 63, Lead C
Stroke：Max. 800 mm^? 　? Size 63

IP69K is the degree of protection against dust and hightemperature/high-pressure water washdown specified in DIN 40050-9 and currently specified in ISO 20653 and JIS D 5020.

Separate Controller Ionizer / Slim Bar Type　IZT44/45 Series

Updated Jun-24

Powerfully eliminates static electricity from highly charged workpieces
Pulse AC type, High density emitter arrangement (6 times the number of emitters^?)
? Compared to the existing model
Can be mounted in a narrow space (Height 23 mm x Width 20 mm)
Can be installed through gaps between equipment
Improved installation, replacement, and maintenance in narrow spaces
Powerful static elimination is possible without air supply.
High speed static elimination: Discharge time reduced by approx. 60%
2-way directional static elimination using branch cables
2 ionizer bars can be connected to one high voltage power supply.
Up to 4 high voltage power supply modules can be connected to one controller. (IZT45)
Flexible layout possible with various module connection methods (IZT45)
Controller to Bar maximum installation distance: 15 m

Electro-pneumatic Regulator Integrated Type 64-station Compatible Manifold Plug-in Compact 5-Port Solenoid Valve　JSY3000-P Series

Updated Jun-24

Solenoid valves and electro-pneumatic regulators can be connected to the same manifold.
Valve stations/Number of outputs: For 4 to 64 stations^? /128 points
? Stations are only available in multiples of 4.
Electro-pneumatic regulator stations: 1 to 4 stations
I/O unit stations: Max. 8 stations
Equipment integration allows for the centralized management of control and wiring as well as reduced wiring
Reduced wiring, Reduced number of SI units, Reduced wiring work, Compact

64-station Compatible Manifold Plug-in Compact 5-Port Solenoid Valve　JSY3000-L Series

Updated Jun-24

Valve stations/Number of outputs: For 4 to 64 stations^? /128 points
? Stations are only available in multiples of 4.
Space saving, Reduced number of SI units, Reduced wiring and wiring work

Speed Controller with Compact Indicator　AS-FSA Series

Updated May-24

Height: Max. 5.4 mm shorter
Flow rate can be controlled numerically with the indicator window.
Due to the vernier indication, it is possible to configure fine settings in 1/4 increments.
Reduces work-hours and setting mistakes
A type with a panel mount adapter has been added. [New]
No tools required, Reduced installation work

In-line Type AS Series

Updated May-24

A panel mount type has been added. [New]
No tools required, Reduced installation work
Reduces labor time
Easy to use push-lock type
Knob O.D.: Almost doubled
Improved reproducibility of flow rate
Lightweight: Weight reduced by approx. 27%
Electroless nickel plated type is standard.

Electric Actuator/Slider Type (Improved Dust and Water-jet Resistance)　LEFSW Series

Updated May-24

A dust-tight and water-jet-resistant (IP65 equivalent) slider type product
Newly developed special wear-resistant seal band
A special wear-resistant seal band is mounted on the bottom to prevent dust and water from entering the inside of the product.
With internal battery-less absolute encoder
Restart from the last stop position is possible after recovery of the power supply.
Reduced maintenance (No need to manage or replace batteries)
Work load：Max. 65 kg (Size 40, Lead B)
Stroke：Max. 1200 mm (Size 40)

Low GWP Refrigerant Chiller/Refrigerated Thermo-chiller　HRZF Series

Updated May-24

Low GWP refrigerant chiller
GWP: 146^?　? Regulation (EU) 2024/573, AIM Act 40 CFR Part 84
EU refrigerant regulations: GWP150 or more
US refrigerant regulations: GWP700 or more
California, US refrigerant regulations: GWP750 or more
Environmentally friendly R454C as refrigerant (Not available for air transport)
More effective energy-saving is achieved through use of a DC inverter compressor and an inverter pump.

Compact Slide ?6, ?10, ?16, ?20, ?25　MXH2 Series

Updated Apr-24

Size ?25 have been added. [New]
Same width as size ?20
Allowable moment: Max. 1.4 times greater than that of size ?20
Improved linear guide rigidity reduces the amount of table displacement by 48%
Displacement due to a force acting in the pitch direction: 48% reduction (0.31 mm→0.16 mm)
Displacement due to a force acting in the yaw direction: 63% reduction (0.24 mm→0.09 mm)
Displacement due to a force acting in the roll direction: 90% reduction (0.06 mm→0.006 mm)
Max. standard stroke: 150 mm (For ?20, ?25)[New]
Weight: Max. 6% reduction (194 g→182 g)
Dimensions for mounting and length are equivalent to the existing MXH series.

Stainless Steel Speed Controller (Max. operating temperature: 150°C) In-line Type　ASG Series

Updated Apr-24

Improved corrosion/heat resistance with the all stainless steel exterior
Possible for use in environments such as high temperature, water splashing, and where copper and zinc cannot be used
Material: Stainless steel 316 (External metal parts)^?, FKM (Seal)
? Stainless steel 304 is used as the material for parts other than body A.
Max. operating temperature: 150°C
NSF H1 grease

Pulse Blow Valve　AXTS040-X202

Updated Apr-24

The peak pressure of repeatedly colliding air permits efficient blowing.
CO₂ emissions (Air consumption) : 50% reduction
Control for pulse generation is not required.
Pulse blow can be used by simply supplying air.
Built-in pilot valve construction allows for stable blowing.

Air Management System　AMS20/30/40/60 Series

Updated Apr-24

Air consumption: Max. 62% reduction
Monitors the machine standby conditions (when production stops) and automatically decreases the pressure.
Reduces unnecessary air consumption
Compatible with OPC UA
Direct connection enables data communications.
Compatible with wireless systems
Communication cables not required
High security thanks to unique encryption
Communication distance: Max. 100 m
IO-Link compatible

Low-Pressure / High-Precision Type 5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator　ITVX2030-X10

Updated Mar-24

Improved accuracy at 1 MPa or less
Repeatability: Repeatability
Pressure stability: 0.5% F.S. or less
Max. supply pressure: 5.0 MPa
Set pressure range: 0.01 to 3.0 MPa
Max. flow rate: 3000 L/min (ANR)
Fluid: Air, N₂, O₂, Ar
Wetted parts: Fluorine grease

Compact Cylinder/High Power Type　CQE Series

Updated Mar-24

Sizes 25 and 40 have been added. [New]
Theoretical output: 1.5 times
This is done even with the same external dimensions of the CQ2 series.
The theoretical output of the next larger bore sized cylinder is made possible with the polygonal piston shape.
Contributes to a lower pressure air line
Supply pressure decreaed by 0.17 MPa
The same theoretical output is available even when the supply pressure to the cylinder is decreased.

Compact Cylinder 　CQ2/CDQ2 Series

Updated Mar-24

Sizes ?4, ?6, and ?10 have been added. [New]
?4 to ?200 lineup
Space-saving cylinder designed with a compact body
Small auto switches can be mounted on 4 surfaces. (1 surface for ?6 annd ?10, 2 surfaces for ?12 to ?25)
No projection of the auto switch
Weight: Reduced by 5 to 13% (Compared with the existing CQ2 series)
Newly added compact type foot brackets and double clevis pivot bracket
Part numbers with a rod end bracket and/or mounting bolt are available. (It is not necessary to order a bracket for the applicable cylinder separately.)
With auto switch (CDQ2 series: CDQ2, CDQ2W, CDQ2K, CDQ2KW, CDQP2, CDQ2□S, CDBQ2)

Manifold Controller　JXD1-M□ Series

Updated Mar-24

Up to 16 axes can be connected
Max. 8 driver units can be connected
Fanless design (no cooling fan)
No cooling fan = No need to worry about fan replacement
Operating temperature range: 0 to 55°C
Communication protocol
CC-Link
EtherNet/IP?
EtherCAT^?
PROFINET^?
Cables, etc. can be attached from the front.

Direct Operated/Pilot Operated 2-Port Solenoid Valve　JSX/JSX□ Series

Updated Mar-24

A pilot operated steam type (JSXP series) has been added. [New]
Improved environmental resistance due to the stainless steel coil cover【IP67 enclosure/NEMA4X^?】
? IP65 for models with a DIN terminal
Space saving
Compact: Valve volume reduced by 25%^?, Lightweight: Weight reduced by 30%^?
? Compared with the existing model
Energy saving
Coil force: 10% increase^?, Power consumption: 14% reduction^?
? Compared with the existing model
360° lead wire insertion and removal is possible.
Improved weather resistance in outdoor environments

Multi Hand Adapter　RMMA Series

Updated Mar-24

Allows for the handling of various workpieces by a single robot
Allows for the simultaneous transfer of multiple workpieces
Up to 3 grippers can be mounted.
Reduces tool changing time
Robot arm end standards: Equivalent to ISO9409-1-50-4-M6
3 gripper mounting angles

Air Flow Controller　IN502-44/45/46

Updated Mar-24

A rated control flow rate range of 200 to 2000 L/min has been added. [New]
Automatic flow rate adjustment is possible.
Dry air, N₂
Control accuracy: ±5% F.S.
Responsiveness: 0.5 s or less
Space saving/Reduced piping, wiring, and installation labor
Various types of grease can be selected.
Grease compatible with low dew points, White vaseline, Grease for food
IO-Link compatible

Modular Type Water Separator　AFG-D Series

Updated Mar-24

The no filter element design achieves a large flow and maintenance free construction.
Water droplets are removed by centrifugal force.(Water droplet removal ratio: 99%)
Air containing water droplets is rotated to remove them by centrifugal force.
Modular Design with Uniform Body Style

2-Layer Fluoropolymer Polyurethane Tubing　TUE Series

Updated Mar-24

2-layer tube with excellent environmental resistance and flexibility
Outer layer: Fluoropolymer, Inner layer: Polyurethane
Tubing I.D.: Cross-section ratio increased by 44% (Compared to TU0805)
Wide color variations
Available in black, white, blue, and translucent colors.

Longer Life Cylinder　C85/C75-XB24

Updated Mar-24

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specification and imensions as the existing models,
C85 ISO Cylinder series and C75 Air Cylinder series.

Multistage Ejector　ZL1/ZL3/ZL6 Series

Updated Mar-24

An IO-Link compatible vacuum pressure switch has been added. (ZL3, ZL6) [New]
Allows for ejector control with a single communication line
Reading of the device information and parameter batch settings are possible.
Max. suction flow rate: 3 types available: 100, 300, and 600 L/min (ANR)
Air consumption: 91% reduction (ZL3, ZL6)
Reduced by the pressure switch for vacuum with energy saving function and efficient ejectors
Weight: Max. 60% reduction [ZL112 (Existing model): 450 g → ZL1: 180 g]

Remote Type Pressure Sensors/Pressure Sensor Controllers　PSE Series

Updated Feb-24

Switch output specification [New]
IO-Link compatible [New]

Elastic Finger　MH-X7654

Updated Feb-24

Rubber sheet fingers enable gripping of an indefinite workpiece
Design of the finger according to the workpiece shape is not required.
Allows for gripping of tightly packed workpieces
The elastic finger mounting attachment to be produced by the customer.
Material
　?Silicone rubber (Blue)
　　This product is made of materials compliant with FDA
　　 (U.S. Food and Drug Administration) regulations
　　as well as Japan Food Sanitation Act standards.
　?EPDM (Black)

Wireless System　EXW1/EX600-W Series

Updated Feb-24

DeviceNet?has been added to the compact type EXW1 Series [New]
Noise resistance
　Uses the 2.4 GHz ISM frequency band
　Frequency hopping: Every 2 ms (Fastest)
Communication cables not required
Reduced wiring work, space, and cost
Minimized disconnection risk
Provides communication stability in FA environments
Compact and lightweight (EXW1)
Volume: Approx. 81% reduction, Weight: Approx. 79% reduction
Modular connection is possible. (EX600-W)

Electric Vacuum Gripper for Collaborative Robots　ZXPE5 Series

Updated Feb-24

Can be used with the collaborative robots of 4 companies
UNIVERSAL ROBOTS
OMRON/TECHMAN ROBOT [New]
FANUC CORPORATION [New]
ASKAWA Electric Corporation [New]
A vacuum gripper that doesn't require an air source
Operation possible by simply connecting an electrical wire connector
Can be used without an air source due to the built-in vacuum pump
Unitization of the peripheral devices required for adsorption
The vacuum pump, atmospheric release valve, pressure monitor, and cups have been integrated.
Current consumption: Max. 64% reduction
Energy-saving operation possible via automatic/manual modes
Lightweight: 556 g
A wide variety of cup variations are available to support a wide range of workpiece shapes.
Standards: Conforming to ISO9409-1-50-4-M6

Thermo-chillers for the Semiconductor Industry　INR-495-042/INR-495-043

Updated Feb-24

Non F-Gas (CO₂ refrigerant)
GWP: 1 (Natural refrigerant)
EU refrigerant regulations: GWP150 or less^?
US refrigerant regulations: GWP700 or less^?
California, US refrigerant regulations: GWP750 or less
?As of December 2023
Air transport possible
No air transport restrictions for non-toxic and non-flammable^? refrigerants
?A1 (ASHRAE34 standard)
No F-Gas management required
Eliminates the need for periodic inspections based on the Fluorocarbon Emissions Control Act (Japan)
No F-Gas recovery & disposal costs

Metal Speed Controller/Low Profile Type　ASBL Series

Updated Feb-24

Improved environmental resistance with the all metal exterior
For use in environments with welding spatter, dust, ultraviolet, etc.
Improved installability using a hexagon wrench
Improved piping design flexibility (360° rotation)
Reduced height when installed: Approx. 30% reduction
(when a knob is fully opened)
? 21.2 mm: ASBL23□1-01-06 ? 30.9 mm: ASB22□1-01-06

Motorless Type　LE□ Series

Updated Feb-24

A large slider type (LET-X11 series) has been added. [New]
A high precision type slide table (LESYH series) has been added. [New]
Your motor and driver can be used together
Manufacturers of compatible motors: 18 companies

Analog Auto Switch and Display Sensor Monitor　D-MH1□ Series

Updated Feb-24

Outputs the analog voltage according to the actuator stroke position
A single switch can discriminate between max. 3 position points.
Discriminable resolution: ±0.1 mm ? Within the high-resolution range
Detection position setting can be done away from the actuator.
Analog voltage output (1 to 5 V)
　Can also be used with the analog auto switch single unit
Reduced setting labor
　No need to fine-tune the switch mounting position
　Easy adjustment even in narrow places and on moving parts
Improved productivity
　Gripper fully open R gripping R gripping failure detection
　Detection of gripper finger wear
　Minimized lead wire disconnection risk

Vacuum Unit Ejector System/Vacuum Pump System　ZK2□A Series

Updated Jan-24

Supply valve: An N.O. specification has been added. [New]
Can hold vacuum^? even when the power goes out or is turned off
Prevents the sudden dropping of workpieces^?
? Supposing the supply pressure is being maintained
An IO-Link compatible pressure switch has been added. [New]
Allows for ejector control with a single communication line
Reading of the device information and parameter batch settings are possible.
Compatible with ejector systems and vacuum pump systems
Energy saving ejector
Air supply is cut-off when vacuum is reached.
Air consumption: 93% reduction (Under SMC’s measurement conditions)
More efficient ejector: Suction flow increased by 50%
(Compared to other SMC 1-stage ejectors)
Energy saving efficiency: 93% reduction
Improved low noise and suction flow by adoption of a high-noise reduction silencer

Electric Gripper for Collaborative Robots　LEHR Series

Updated Jan-24

Can be used with the collaborative robots of UNIVERSAL ROBOTS, FANUC CORPORATION, and OMRON/TECHMAN ROBOT
2 variations are available.
Gripping force: 60 to 140 N
Operate by simply connecting 1 electrical wire
Annual CO₂ emissions reduced by up to 52% through motor control optimization (SMC comparison)
With internal battery-less absolute encoder
Easy tool changing (Manual changer)
Compatible plug-in software: URCap

Wear Resistant Tubing/Clear Type　TUZC Series

Updated Jan-24

Abrasion: Approx. 1/3
(Compared with SMC polyurethane tubing TU series)
Clear type
Transparency in which the inside contents of a tube can be seen.

Flow Controller for Air PFCA7 Series

Updated Jan-24

For the automatic adjustment of the flow rate
Applicable fluid: Dry air, N₂, Ar, CO₂
Color display/2-screen display supported
For the confirmation of the instantaneous flow rate, flow rate command value, and accumulated flow rate at a glance
IO-Link compatible
Flow ratio 100:1

3-Screen Display High-Precision Digital Pressure Switch　ZSE20□(F)/ISE20□ Series

Updated Dec-23

An M12 connector type has been added to the 20B series. [New]
A low pressure range type has been added to the 20A series. [New]
An IO-Link compatible type has been added to the 20C series for general fluids.
Visualization of settings
Simple 3-step setting
Easy screen switching
Delay time:1.5 ms or less
Current consumption: 25 mA or less

Water Resistant Stainless Steel Speed Controller　HF2A-ASG-□V Series

Updated Dec-23

The water-resistant construction and the stainless steel external parts allow for the product to be used in environments where it may come into contact with water droplets.
Metal material: External metal parts stainless steel 316^??1
*1 Stainless steel 304 (external metal parts excluding body A)
Grease: NSF H1 grease
Max. operating temperature: 150°C
mproved water-resistance and washabili

Vacuum Filter　AFJ-D Series

Updated Dec-23

Prevents vacuum equipment trouble
Nominal filtration rating：5,40,80μm
Large flow capacity：max.660L/min（ANR）
Elements can be reused by washing them.
Water drops can be removed.?
The bowl is covered with a transparent bowl guard

Push-lock Type Dual Speed Controller with One-touch Fitting　ASD-A Series

Updated Dec-23

Easy to lock push-lock type
No tools required. Larger knob
Allows for simultaneous meter-in and meter-out control
Prevents cylinders from popping out, and allows for the speed control of single acting cylinders
Easy identification of meter-in or meter-out by knob color
Lightweight: Approx. 28% lighter
Improved reproducibility of flow rate

Multistage Ejector　ZL1/ZL3/ZL6 Series

Updated Dec-23

An N.O. specification has been added to the pressure switch for vacuum with energy saving function. [New]
Can hold vacuum? even when the power goes out or is turned off
Prevents the sudden dropping of workpieces?
? Supposing the supply pressure is being maintained
An IO-Link compatible vacuum pressure switch has been added. [New]
Allows for ejector control with a single communication line
Reading of the device information and parameter batch settings are possible.
Max. suction flow rate: 3 types available: 100, 300, and 600 L/min (ANR)
Air consumption: 91% reduction (For the ZL3, ZL6)
Weight: Max. 60% reduction [ZL112 (Existing model): 450 g → ZL1: 180 g]

Flow Sensor　PFMV5/PFGV301 Series

Updated Dec-23

3-screen display digital flow monitor PFGV301 series [New]
A measuring flow rate range of 0.0 to 0.1 L/min (-X502) [New]
has been added.
For suction verification of very small workpieces
The flow sensor enables more reliable suction verification than a pressure sensor.
Repeatability: ±2% F.S.
Response speed: 5 ms or less
Withstand pressure: 500 kPa
Grease-free

3-Color Display Digital Flow Switch for Water　PF3W Series

Updated Dec-23

Output specification variations have been added. [New]
PF3W7: Analog voltage 2-output type (flow rate + temperature)
　　　　Analog current 2-output type (flow rate + temperature)
3-screen display 4-channel flow monitor PFG200 series [New]
3-color/2-screen display
Integrated temperature sensor
40% smaller than the existing product
IP65 compliant, Non-grease type
Fluid temperature: 0 to 90°C
PVC piping type: Applicable to deionized water, chemical liquids, etc.
IO-Link compatible (Made to order)

Compact Vacuum Unit Ejector System/Vacuum Pump System　ZQ□A Series

Updated Dec-23

An IO-Link compatible pressure switch has been added. [New]
Allows for ejector control with a single communication line
Reading of the device information and parameter batch settings are possible.
Vacuum pressure switch with energy saving function
Air consumption: 90% reduction (Based on SMC’s measurement conditions)
Power consumption: 60% reduction [1 W (Existing model) → 0.4 W]
Vacuum release pressure: From 0 MPa [From 0.3 MPa (Existing model) → From 0 MPa]
Copy function: Reduced setting labor, Minimized risk of setting mistakes
Compatible with ejector systems and vacuum pump systems

Flow Controller for Water　FC3W Series

Updated Dec-23

For the stepless control of water flow rate in proportion to electrical signals
Flow rate control accuracy: ±5% F.S.
Response time: 10 s or less
Grease-free

3-Color Display Digital Flow Switch for Water　PF3W-Z/L Series

Updated Nov-23

Output specification variations have been added. [New]
PF3W7-Z: Analog voltage 2-output type (flow rate + temperature)
　　　　　Analog current 2-output type (flow rate + temperature)
Compatible with the PFG200 series 3-screen display 4-channel flow monitor [New]
Applicable fluid: Water, Ethylene glycol aqueous solution
Lightweight: Max. 53% reduction (40 L/min, With temperature sensor)
IO-Link compatible
3-color/2-screen display
Compatible with the temperature sensor & flow adjustment valve
Fluid temperature: 0 to 90°C

Electric Actuator/Large Slider Type, Belt Drive　LET-X11 Series

Updated Oct-23

Max. work load: 240 kg (Size 100)/75 kg (Size 80)
Stroke: Up to 3000 mm (Standard)
Max. speed [mm/s]: 4000 (Size 100), 2160 (Size 80)
Max. acceleration/deceleration [mm/s²]: 20000
Simplified belt replacement
Solid state auto switches are mountable.

Plug-in Electro-Pneumatic Regulator / Manifold Type IITV23 Series

Updated Oct-23

Connects the electro-pneumatic regulator and the fieldbus device to the same manifold.
This results in reduced wiring, less man hours for piping and a more compact size.
Compact
Installation area: 20% reduction, Occupied volume: 10% reduction
Gain setting
Sensitivity setting
Remote control and monitoring are available.

Air Saving Impact Blow Valve　IBV Series

Updated Oct-23

Increased impact force due to higher peak pressure
Instantaneous air blow reduces CO₂, air consumption, and operation time
Peak pressure: 2 to 3 times or more
CO₂/Air consumption: 93% reduction
Operation time: 97% reduction

Proportional Control Valve　JSP Series

Updated Oct-23

Control the flow rate smoothly according to the current
Repeatability: ±3% F.S. or less
Sensitivity: 2% F.S. or less
2 body types: Body ported, Base mounted
IP67 enclosure
Seal material: FKM
Choice of body material: Stainless steel, Brass
Electrical entry: Grommet, Conduit, DIN terminal

Electro-Pneumatic Regulator / High Flow Rate　ITV1100/2100/3100 Series

Updated Oct-23

For the stepless control of air pressure in proportion to electrical signals
Flow rate: Max. approx. 5 times
(Compared with the existing model)
Sensitivity: ±0.2% F.S. or less
Linearity: ±1% F.S. or less
Hysteresis: 0.5% F.S. or less

Compact Compressor　CRP Series

Updated Oct-23

Supplies compressed air in an environment with no air source such as cobots, AGV and AMRs
Compact: 154 mm (Width) x 134 mm (Height) x 100 mm (Depth)
Lightweight: 3.5 kg (Compressor: 3.1 kg, Controller: 0.4 kg)
A single unit can be used to provide positive or vacuum pressure (vacuum pump).
Max. discharge pressure: 0.55 MPa
Ultimate vacuum pressure: ?70 kPa
Oil-free
Noise: 55 dB or less (When the silencer ANB1-01 is installed)
(When supplying positive pressure)
Max. flow rate of 10 L/min (ANR)

Modular Connection Type Compressed Air Preparation Filter/Activated Carbon Filter　AFF/AM/AMD/AMK Series

Updated Sep-23

With clogging switch (Excludes the AMK)[New]
An element service indicator has been added.
(Excludes the AMK)
Compressed air purity class: ISO 8573
Weight reduced by 50%
AFF/AM□20: 0.19 kg (Existing model: 0.38 kg)
Face-to-face and depth dimensions reduced by 30%
The increased air flow capacity due to a reduced pressure drop contributes to energy saving.
Flow capacity increased by 50%
Pressure drop reduced by up to 50%

4-Port Solenoid Valve Cassette Type Manifold　SJ1000/2000/3000/4000 Series

Updated Sep-23

A large flow type (SJ3000A) has been added.[New]
An SJ4000 manifold has been added.[New]
Allows for the mixed mounting of 5 SJ series valve sizes
Connector type (Card edge type)
Easily increase or decrease the number of stations and easily replace valves
Non plug-in individual wiring compliant

Flow Controller for Air PFCQ Series

Updated Sep-23

Flow rate control range: 9 to 300 L/min
* Operational differential pressure range: 0.05 to 0.5 MPa
Time to reach the set flow rate: 0.5 seconds or less
(When the operating differential pressure is 0.3 MPa and the flow rate is set to 300 L/min)
Flow rate accuracy: ±3% F.S.
Grease-free
Lightweight 850 g
3-screen display digital flow monitor PFG310-X105

Air Grippers for Collaborative Robots　RMH□ Series

Updated Sep-23

Unitization of the peripheral devices required for gripper driving
Operation is possible simply by connecting 1 air supply tube and
1 electrical wire.
Built-in solenoid valve, exhaust throttle valve with silencer, auto switch, fitting, etc.
3 types of grippers available for use with a variety of workpieces
Can be used with the collaborative robots of 12 companies
Manual changer built in as standard
Allows for easy tool changing and labor saving
Air consumption reduced by up to 80%

Direct Operated 2-Port Solenoid Valve　HF3-JSX

Updated Aug-23

NSF/ANSI 61 certification
IP67 enclosure
Space saving
Compact: Valve volume reduced by 25% (Compared with the existing model)
Lightweight: Weight reduced by 30% (Compared with the existing model)
Body material: Stainless steel

［Model with Residual Pressure Release Function］
Speed Controller with Pilot Check Valve　ASP Series

Updated Jul-23

A stainless steel type (ASP-G series) has been added.
For secondary battery manufacturing processes [New]
Model with residual pressure release function: It is possible to construct a safety circuit.
Model without residual pressure release function: Temporary intermediate stops are possible.
Vertical and horizontal types are available, which can be selected depending on the installation conditions.
Improved piping design flexibility (360°-rotation type)

Modular Connection Type Membrane Air Dryer　IDG-D Series

Updated Jul-23

Compatible with various ISO water quality classes
Modular connection is possible.
Non-fluorocarbon
Power supply not required
No vibration or heat discharge
Contributes to energy saving
Pressure drop reduced by up to 61%
Outlet air flow rate Max. 25% increase
Purge ratio: Approx. 14%

Valve Manifold Integrated with Ejector System JSY1000-E Series

Updated Jul-23

A vacuum release flow adjustment unit has been added. [New]
Compact All-in-One Manifold
The devices have been integrated into one for applications in which an actuator and vacuum suction are used together.
EtherCAT^?，IO-Link，PROFINET^? compatible [New]
Wiring/Piping Saving through Use of All-in-One Manifold
Installation area: 64%reduction
Weight: 42%reduction
Energy Saving Function
CO₂emissions (Air consumption) : 90% reduction

Longer Life Cylinder　CXS2-XB24

Updated Jul-23

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specification and dimensions as the existing models,
CXS2 Dual Rod Cylinder series

[For High-Pressure Water] Pilot Operated 2-Port Solenoid Valve　JSXH-X2

Updated Jul-23

Can be used at up to 10 MPa
For high-pressure washing, water spraying, and misting
An IP67 structure with improved environmental resistance (The DIN terminal is IP65.)
Orifice diameter [mm?]: 12
Flow rate characteristics [Kv]: 1.7 (Port size 3/8), 1.9 (Port size 1/2)
Easy maintenance
The coil can be replaced by simply removing the clip.
Power consumption: 8 W

Pulse Valve Valve for Dust Collector　JSXF/JSXFA Series

Updated Jul-23

A SMARTVENT type has been added. [New]
The integrated control board eliminates the need for a control box.
Life: 10 million cycles or more/10 times or more
High peak pressure and low air consumption
Peak pressure: 15% increase, Air consumption: 35% reduction
Fluid temperature: ?40 to 60°C
Can be used in a wide range of temperatures

Modular F.R.L. Units　AC Series

Updated Jul-23

A right angle square type pressure gauge and various attachments have been added. [New]
Modular Design with Uniform Body Style
Better visibility & environmental resistance
2-layer construction: The bowl is covered with a transparent bowl guard!
Better visibility: 360°
No tools are required.
Easier replacement of the element (AF20-D to AF40-D only)

OSHA Standard Compliant Nozzle for One-touch Fitting　KNA(G)-Q10-180

Updated Jun-23

Compliant with OSHA Standard 1910.242(B)
The structure prevents closing of the discharge port.
This is a safety design that limits the pressure to 30 psi even when an operator is touching the nozzle.
(Operating pressure: 0.5 MPa or less)
CO₂ emissions (Air consumption): 42% reduction
Low noise: Max. 8 dB(A) reduction^?
? Compared with the existing model: nozzle for One-touch fitting (resin type) KN-Q10A-200

3-Screen Display 4-Channel Flow Monitor　PFG200 Series

Updated Jun-23

Up to 4 flow sensors can be connected!
It is possible to change the settings while checking the measured value.
Centralized control saves installation space.
66% reduction in installation space (Compared with the panel mounted PFG20□)
Accumulated flow measurement
A single product can manage the accumulated flow in four lines.
A single monitor various applications
3 channels are displayed simultaneously. (Customer defined channel can be set.)

Longer Life Cylinder　CUJ-XB24

Updated May-23

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specification and dimensions as the existing models,
CUJ Mini Free Mount Cylinder series

Bernoulli Gripper with Coanda Grip　ZNC-C Series

Updated Apr-23

Reduces the impact of air flow on light-weight workpieces and adjacent workpieces
Prevents lateral slide when suctioning the workpiece
There is no risk of suctioning of powder matter adhering on the workpiece into the device and pipe, as the workpiece is suctioned while air is blow.
Body material: Stainless steel, Aluminum
With Coanda grip
Prevents blowing away of workpiece before suctioning and lateral sliding of workpiece during suctioning

Magnetically Coupled Rodless Cylinder/Basic Type ?6, ?10, ?15, ?20, ?25, ?32, ?40, ?50, ?63　CY3B Series

Updated Apr-23

Lightweight
The product weight has been reduced through re-designing of the body and head cover shapes and employment of magnetic coupling.
Weight: 16% reduction (1.35 kg → 1.13 kg)
Improved lubrication
A Lube-retainer is installed to support lubrication retention on the piston and to ensure a lubrication film. (Bore size: ?15 to ?63)
Stable operation
Lengthening of the wear ring on the body side by, 30% at maximum, helps to achieve smooth movement.
Lengthening of the wear ring on the body side by, 30% at maximum, helps to achieve smooth movement.

Air Slide Table/High Rigidity Type ?32　MXQ32-X2600

Updated Apr-23

75, 100, 125, and 150 mm strokes have been added. [New]
A linear guide with a 4-row circular arc groove for high rigidity and high precision
Table displacement: Reduced by 50% (0.022mm→0.011mm)
Max. load weight: 16 kg
Aluminum table:
Load weight increased by reducing the weight of moving parts
Integrated pilot port, stroke adjuster, and auto switch on 1 side allows for improved operability

Plug-in Bottom Ported Manifold with Stainless Steel Plate　JSY3000-S Series

Updated Mar-23

Bottom seal/stainless steel plate prevents the flooding of valves.
Wiring
D-sub connector/Flat ribbon cable/Terminal block box/Lead wire/Serial unit (EX600, EX245, EX250, EX260)
Compatible with EtherNet/IP? and IO-Link

Compact Type Speed Controller with Indicator　JAS-SML/SCL Series

Updated Mar-23

Improvement of resolution has made it possible to make fine adjustment.
1?50mm/s：JAS-SML Series
50?150mm/s：JAS-SCL Series
Height: Max. 20.8 mm shorter
Flow rate can be controlled numerically with the indicator window.
Due to the vernier indication, it is possible to configure fine settings in 1/4 increments.
Reduces work-hours and setting mistakes

Longer Life Cylinder　CJ2-XB24

Updated Mar-23

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specification and dimensions as the existing models, CJ2 Air Cylinder series

Longer Life Cylinder　CQS-XB24

Updated Mar-23

New technology offers at least 4 times better durability.
The maintenance intervals will be extended.
Employs the same specification and dimensions as the existing models,
CQS Compact Cylinder series

Angle Seat Valve / Air Operated Type　JSB Series

Updated Mar-23

Low pressure loss due to angle seat structure!
Long service life: 10 million cycles (Air, Water), 3 million cycles (Steam)
Large flow rate
A large flow rate is possible due to the optimized flow channel shape. (Cv factor: approx. 2.5 times)
Compact: Height 166 mm (Port size: 1")
Abundant series variations of 7 sizes
All-in-One (Stainless steel 316L equivalent)
Air, Water, Steam

Dual Rod Cylinder ?6, ?10, ?16, ?20, ?25, ?32　CXS2 Series

Updated Mar-23

Allowable kinetic energy: 0.016 J (7 times that of the existing model)
Max. piston speed: 800 mm/s (2.6 times that of the existing model)
Max. standard stroke increased
Mounting dimensions are compatible with the existing CXS series products.
Double piston construction provides twice the output force.
Non-rotating accuracy of ±0.1° because of the dual rod construction

Compact Type Speed Controller with Indicator　JAS-S Series

Updated Mar-23

Height: Max. 20.8 mm shorter
Flow rate can be controlled numerically with the indicator window.
Due to the vernier indication, it is possible to configure fine settings in 1/4 increments.
Reduces work-hours and setting mistakes
Mounting stud is available on the left side or the right side.

Metal Speed Controller with Indicator　ASB-□H Series

Updated Mar-23

Improved environmental resistance with the all metal exterior [With indicator]
For use in environment with welding spatter (Option BH type)
Contributes to reducing setting time and errors by allowing the user to adjust flow rate before mounting and operating the cylinder
Possible to manage the flow rate values using an indicator!
Flow adjustable with a hexagon wrench tool
Prevents accidental manual operation
Adjustment needle lock nut feature as standard
Prevents unauthorized adjustment and unwanted operation of the needle from the set position due to vibrations or impacts.
Helps improve safety in your machinery.
2 types are available for different applications.
For welding environments and for general environments

Thermo-chiller/Low-temperature Type　HRS040-A-20-T1-X158/X164

Updated Mar-23

Supports low temperatures of as low as ?10°C
Compact: Equivalent in size to the HRS040
Cooling capacity: 1 kW (At ?10°C)
Temperature stability: ±0.1°C
Set temperature range: ?10°C to 40°C

Speed Controller with Compact Indicator　AS-FSA Series

Updated Mar-23

Body sizes 1/8, 1/4, 3/8, and 1/2 have been added. [New]
Height: Max. 5.5 mm shorter
Flow rate can be controlled numerically with the indicator window.
Due to the vernier indication, it is possible to configure fine settings in 1/4 increments.
Reduces work-hours and setting mistakes
Better visibility
Check from 360° directions is possible.
　Inspection and maintenance works are facilitated.

Speed Controller with Compact Indicator　AS-FSMA/FSCA Series

Updated Mar-23

Body size 1/4 has been added. [New]
Improvement of resolution has made it possible to make fine adjustment.
1 to 50 mm/s: AS-FSMA series
50 to 150 mm/s: AS-FSCA series
Flow rate can be controlled numerically with the indicator window.
Due to the vernier indication, it is possible to configure fine settings in 1/4 increments.
Reduces work-hours and setting mistakes
Better visibility
Check from 360° directions is possible.
Inspection and maintenance works are facilitated.

Deceleration Controller　DAS Series

Updated Feb-23

2-speed control reduces cycle time
Allows for the impact relaxation of the stroke end
　Allows for the 2-speed control of cylinders
The deceleration position (cushion timing) and 2nd speed (cushion intensity) can be adjusted.
Possible to control flow rate values using an adjustment handle with graduations
Space saving
　Maximum 76% reduction of occupying space (196cm³ ← 811cm³)

Grippers for Collaborative Robots ZXP7-PFL1-□-X1, JMHZ2-X7500-KR for KAWADA ROBOTICS CORPORATION, NEXTAGE

Updated Feb-23

Cups with Flange

Standards: Conforming to ISO9409-1-50-4-M6
Tube-less piping
Individual piping to suction cups is unnecessary and there is no interference with workpieces or operators
A wide variety of cup variations are available to support a wide range of workpieces.

Air Gripper

Compact, lightweight product with high gripping force due to air operation
An air gripper that realizes high rigidity and high precision due to its guide-integrated construction
With high-precision linear guide
Repeatability: ±0.01 mm
Standards: Conforming to ISO9409-1-50-4-M6

Air Saving Impact Blow Gun　IBG Series

Updated Feb-23

An adjuster with indicator has been added. (With protective cover) [New]
A compact type (IBG2 series) has been added. [New]
Increased impact force due to higher peak pressure
Instantaneous air blow reduces air consumption and operation time.
Air consumption: 87% reduction

Vacuum Pad / Bellows Type　ZP3P-JT Series

Updated Feb-23

A flat attachment has been added. (2.5-stage)[New]
For reducing wrinkles
For the adsorption transfer of workpieces with flexible soft film packaging
Thin film skirt and special shaped ribs
The pad and attachment are made of materials compliant with FDA
(U.S. Food and Drug Administration) regulations as well as Japan Food Sanitation Act standards.
Blue colored pad
Easy to distinguish the vacuum pad by color during
contamination inspection

Vacuum Flow　ZHV Series

Updated Jan-23

Blow and vacuum can be performed by supplying compressed air.
Blow flow rate: Max. 6820 L/min (ANR)^?1
Vacuum flow rate: Max. 5270 L/min (ANR)^?1
?1 Values for the ZHV40 when the supply pressure is 0.5 MPa
It is possible to adjust the blow and vacuum flow rate by adjusting the nozzle position!
A vacuum flow rate 3 times or more the supply air ^?2
?2 Excludes the ZHV10
A blow flow rate 4 times or more the supply air ^?2
?2 Excludes the ZHV10
Weight: Max. 50% reduction (209 g ← 417 g)^?3
?3 ZHV20, in comparison with product (ZH20-X185)
Volume: Max. 50% reduction (17000 mm³ ← 34000 mm³) ^?4
?4 ZHV10, in comparison with product (ZH10-X185)
In terms of body mounting, port connection, and passage diameter, this product is compatible with the product (ZH-X185).

Longer Life Cylinder　MGJ-XB24

Updated Jan-23

New technology offers at least 4 times better durability.
Employs the same specification and mounting dimensions as the existing models,
MGJ Miniature Guide Rod Cylinder series

Bernoulli Gripper ?20, ?30, ?40, ?60, ?80　ZNC Series

Updated Jan-23

Body size ?20 has been added. [New]
For the adsorption transfer of thin cloths, films, printed circuit boards, etc.
Energy saving: Max. 79% reduction
(Comparison of air consumption to lifting force)
High lifting force: 65 N
10.3 times that of the existing model
(Existing model: 6.3 N → ZNC80: 65 N)
3 types of body materials: Aluminum, Resin, Stainless steel
Attachment
With stopper: Prevents workpiece slippage
With vibration suppression cover: Suppresses the vibration noise of thin workpieces

精品天堂,日韩欧美一级视频观看,99久久久无码国产精品66 ,欧美洲久久久