靜電消除器
控制器分離型靜電消除器／棒型 IZT40/41/42
| 系列 | 型式 | 離子發生方式 | 補正電壓（離子平衡） |
|---|---|---|---|
| IZT42 | 雙AC方式型 | 電暈放電式 | ±30V以內 |
| IZT41 | AC方式型 | 電暈放電式 | ±30V以內 |
| IZT40 | 標準型 | 電暈放電式 | ±30 V以內 |
產品特點
Height reduced by 57 mm(60%)
Can be mounted in a narrow space
The potential amplitude can be reduced with SMC?s original dual AC type sensor.
Static neutralization in consideration of damage to a device which is sensitive to electrostatic discharge (ESD) can be achieved.
The potential amplitude applied to the applicable workpiece is reduced even if the workpiece is mounted within close proximity of the ionizer.
Dual AC type IZT42
+ ions and - ions are discharged at the same time to allow the + and - ions to reach the workpiece evenly, thereby reducing the potential amplitude.
AC type IZT40/IZT41
+ ion and - ion layers reach the workpiece alternately, which increases the potential amplitude.
Application Examples For the static neutralization of glass substrates
Prevents the breakage of glass substrates by the static electricity generated when the substrate is lifted from the surface plate
For the static neutralization of electric substrates
?Prevents element disruption due to discharge
?Prevents the adhesion of dust
The sensor is installed within the ionizer body and may be mounted anywhere.
The o?set voltage (ion balance) in the static neutralization area is controlled so that the voltage is maintained at a constant value by monitoring the ions emitted from the ionizer using the ground line.
With auto balance function
Simple operation: Can be controlled by powering the ionizer ON.
An AC adapter is available.
(The AC adapter can only be used for 1 ionizer.)
The connector connection of cables is possible for each module after installation.
The optimal design of the piping port size allows for su?cient blow performance even with piping only on one side.
Air supply port position is selectable: Right side/Left side/Both sides
Bar and cable lengths are selectable.
Emitter cartridge drop prevention function
Double-action locking
Drop prevention cover
For increased cartridge drop prevention
Minimizes the contamination of emitters by discharging compressed air at the surface of the emitters
2 types of emitter materials
Tungsten/Single crystal silicon (for silicon wafers)
3 types of emitter cartridges
