特殊氣壓缸
For High Precision Positioning Pin Shift Cylinder CKQG-X2370
-
?High Precision: Rod end deflection ±0.1 mm or less
?Position Reproducibility
?Pin for positioning the workpiece provided by the customer can be directly mounted.
?Built-in coil scraper
?Reduces labor time by integrating the cylinder and guide.
?Magnetic field resistant auto switches are mountable.
Safety Instructions Actuators/Precautions Auto Switches/Precautions
Specialized Products for General Use Introduction of Arc Welding Process Equipment
Green Procurement (RoHS)
Specialized Products for General Use Introduction of Arc Welding Process Equipment
Green Procurement (RoHS)
| Type | Series | Bore size（mm） | Stroke（mm） |
|---|---|---|---|
| Built-in standard magnet type | CKQG-X2370 | 32, 40, 50 | 25, 30, 40, 50 |
偏移插銷滑位氣壓缸 CDQ2B-X2839
| 型式 | 系列 | 氣缸內(nèi)徑 (mm) | 行程 (mm) |
|---|---|---|---|
| 偏移插銷滑位氣壓缸 | CDQ2B-X2839 | 32, 40, 50 | 25, 50, 75 |
細長型強力夾緊氣壓缸 CKZ2N-X2346
| 系列 | 力臂開度 | 氣缸內(nèi)徑 (mm) |
|---|---|---|
| CKZ2N-X2346 | 30o, 45o, 60o, 75o, 90o 105o, 120o, 135o | 50, 63, 80 |
車架夾具氣壓缸 WRF100
| 系列 | 氣缸內(nèi)徑 (mm) | 行程 (mm) |
|---|---|---|
| WRF100 | 100 | 48 |
Compact Clamp Unit CDQ2
-
Space saving
Used to clamp the workpiece, and open or close the spatter cover of the workpiece.
?Labor reduction
Reduces design and assembly labor by integrating the cylinder and clamping mechanism.
?Clamp unit used in common
Both ?20 and ?32 clamp cylinders use the same clamp unit and only the clamp unit can be replaced.
This contributes to reduction of spare parts.
?Possible to clamp in both directions
Capable of clamping in both directions with an arm opening/closing angle of 90° or more
Safety Instructions Actuators/PrecautionsSpecialized Products for General Use
Introduction of Arc Welding Process Equipment Green Procurement (RoHS)
Introduction of Arc Welding Process Equipment Green Procurement (RoHS)
| Series | Bore size（mm） | Arm opening angle |
|---|---|---|
| CDQ2B20-DCQ5414Q | 20 | 96° |
| CDQ2B32-DCR0859R | 32 | 96° |
中央鎖定單元 MA331-X441
| 系列 | 作動方式 | 操作空氣壓力 |
|---|---|---|
| MA331-X441 | 複動 | 0.2～0.7 MPa |
Magnet Gripper MHM-X6400
-
?Steel plates can be transferred without a vacuum.
Can support workpieces with holes and uneven surfaces when a vacuum pad cannot be used
?Holds workpieces even when the air is shut off
?High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N
(Workpiece plate thickness: 1.4 mm)
?Residual holding force: 0.3 N or less (Reduces workpiece release time)
| Series | Holding force (Workpiece plate thickness: 0.6 mm) |
|---|---|
| MHM-32D1-X6400 | 80 N |
| MHM-32D2-X6400 | 50 N |
| MHM-32D3-X6400 | 30 N |
