乾燥機
中空膜式乾燥機 IDG□A/IDG
-
?採用中空膜絲，可簡單的供給乾燥空氣
?不用冷媒
?不用電源
?對應低露點（－60℃）
?無振動、無排熱
?附露點檢測器
| 系列 | 出口空氣流量 L/min (ANR) | 基準露點 (°C) |
|---|---|---|
| IDG□A/IDG | 10 ～ 1000 | －15，－20，－40，－60 |
產品特點
Energy saving Reduced in purge air flow by up to 39 (L/min [ANR])
Cost reduced by up to 21,060 yen/year!
Total length is shortened Max. 59 mm Series IDG30A to 100A
Series IDG1
Time to reach the standard dew point Shortened by 40 minutes
Under SMC test condition
(Except IDG1)
(Semi-standard: IDG3, IDG5, IDG3H, IDG5H)
When purge air discharge is undesirable in the area around the membrane air dryer, it can be discharged to atmosphere via tubing (semi-standard).
Except IDG1, IDG3, IDG3H, IDG5, IDG5H, IDG30A, IDG30HA, IDG30LA, IDG50A, IDG50HA, IDG50LA
The membrane air dryer uses hollow fibers composed of a macro molecular membrane through which moisture passes easily, but is difficult for air (oxygen and nitrogen) to pass through.
When humid, compressed air is supplied to the inside of the hollow fibers, only moisture permeates the membrane and moves to the outside due to the pressure difference between the moisture inside and outside of the fibers. The compressed air becomes dry air and continues out of the dryer. Part of the dry air from the outlet side is passed through a very small orifice to reduce the pressure and purge the outside of the hollow fibers. The moisture which permeated to the outside of the hollow fibers is discharged to the atmosphere by this purge air. In this way, the partial pressure outside of the hollow fibers remains low and dehumidification is continuously performed.
Machine Tool
Measuring Machine
Semiconductor-related Manufacturing Equipment
Powder Coating
Food Machinery
Packaging Machine
(sealing of film and paper package)
Others
? Dental equipment ? Ozonizers, Hydrogen gas generating equipment ? Fine particle drying, Transfer equipment ? Condensation prevention in control panels ? Chemical analysis equipment ? Printed circuit board IC mounting machines ? Drying and cleaning of precision parts ? General pneumatic equipment and pneumatic tools
